Custom Video Game Store Fixtures
Custom Video Game Store Fixtures: separate standard interfaces from custom choices. Compare options, acceptance checks and project inputs.
- Published
- 2026-09-09
- Editorial check
- 2026-09-11
- Reading time
- 4 minutes
Editorial buyer guidance. Read our authorship and sourcing policy.
For custom video game store fixtures, start with the merchandise and floor plan, then list the dimensions or operating details that require a custom change. Record finish choices independently from structural changes. This lets the buyer see which decisions affect fit, tooling, installation or later replacement. Issue an option schedule with the selected value, decision owner and drawing reference for every departure from the base system.
Plan with a Specific Cabinet Format.
Suggested development configurations from the supplied V1 workbook. Dimensions are L × D × H in mm; inch values are converted. These model codes and values are proposals, not verified production SKUs or guaranteed performance.
Trading Card Display Counter
1200 × 550 × 950 mm47.2 × 21.7 × 37.4 in- Suggested custom range (mm)
- L900–1500 / D500–600 / H900–1000
- Structure
- 18mm MDF with HPL or painted finish; recessed plinth
- Glass / panel
- 8mm tempered top; 6mm sides, subject to structural review
- Interior & access
- 1–2 adjustable glass shelves; optional inclined trays. Lockable rear sliding doors and lower storage.
- Lighting
- Dimmable 4000K LED in concealed aluminum channels
- Before approval
- Confirm holder fit, access and usable display height
Card Display Checkout Counter
1800 × 650 × 1000 mm70.9 × 25.6 × 39.4 in- Suggested custom range (mm)
- L1500–2400 / D600–750 / H950–1100
- Structure
- 18mm plywood with HPL and reinforced worktop
- Glass / panel
- Display portion: 8mm top and 6mm tempered sides
- Interior & access
- Separate display and POS zones. Cash drawer, locked storage and cable outlets.
- Lighting
- Display LED with centralized service access
- Before approval
- Confirm POS envelope and any lower service section
Source: Trading Card Fixture Specifications V1.xlsx, “Fixture Models”, rows 6–29. All 24 proposed formats · Materials, holder fit and specification notes
Complete Store Program: what to specify.
For custom video game store fixtures, use the following requirements from the linked fixture system to make the next supplier discussion concrete. These are planning inputs, not tested performance ratings.
- Site inputs
- Provide a measured floor plan, entrances, columns, services and target opening date.
- Assortment
- State the mix of graded cards, singles, sealed product and accessories.
- Store operation
- Define staff numbers, trade-in workflow, queueing and event seating.
- Delivery scope
- Confirm destination, installation team, shipping scope and drawing approvals.
Three decisions to carry into your project.
- 01
Issue an option schedule with the selected value, decision owner and drawing reference for every departure from the base system.
- 02
Measured floor plan: record the actual project value.
- 03
Service and play space: check it in the operating layout, not only an empty display image.
What the custom video game store fixtures brief needs to resolve
Before comparing visual options for custom video game store fixtures, establish the boundaries of the project. Document dimensional inputs, material selections, approval stages and change control. State the store condition, merchandise mix, staff involvement and decisions that remain open.
- Record measured floor plan.
- Record merchandise mix.
- Record fixture schedule.
- Record service and play space.
Translate the merchandise into usable dimensions
Build the dimensional schedule for custom video game store fixtures from mixed card, collectible and accessory inventory. Group items by handling method and value, then note the largest normal pack in each group. Keep display capacity separate from back-stock capacity.
Primary references: Nintendo Switch: official technical specifications ↗ · PlayStation: PS5 ventilation guidance ↗
Separate standard interfaces from custom choices
For custom video game store fixtures, give particular attention to custom. Review that issue through dimensional inputs, material selections, approval stages and change control, using a marked-up floor plan and a representative assortment. Write the accepted condition into the project documents so it remains connected to purchasing and production.
- Issue an option schedule with the selected value, decision owner and drawing reference for every departure from the base system.
Follow a complete customer and staff interaction
The operating check for custom video game store fixtures must cover customer browsing, staff assistance, checkout and replenishment. Observe where hands, bags, stools, trolleys and open doors occupy space. Note each conflict and assign a design response before approval.
Configuration decision: establish the comparison basis
Choose between custom video game store fixtures options using the same merchandise, staffing assumption and floor constraints. Record advantages, limitations and the evidence still needed for each option. Select the arrangement first; colour and finish follow that operating decision.
Use a sample to resolve the difficult details
Use a marked-up floor plan and a representative assortment to check the proposed custom video game store fixtures before production release. Check fit, visibility, access, stability, lighting and cleaning in the sample. Photograph accepted details and attach them to the released specification.
A mismatch to catch before approval
Do not release custom video game store fixtures from an image-only approval; operational gaps are rarely visible there. Late discovery leads to site modifications, inconsistent modules or workarounds during service. Prevent it with measured inputs and staged approvals.
Turn the decision into a controlled handoff
Before custom video game store fixtures moves to production, reconcile the quotation, drawings, finish sample and delivery scope. Create a release checklist covering construction, finish, access, lighting, graphics and logistics. Do not let an email image replace controlled documents.
Wood and engineered panels
Apply the FOCUS materials and finishes guidance specifically to custom video game store fixtures. Use it to review dimensional inputs, material selections, approval stages and change control, then transfer only the decisions relevant to this project into the approved drawing and fixture schedule. General guidance does not replace project dimensions, samples or destination requirements.
Primary references: FOCUS Materials & Finish Selection ↗
- Substrate and finish schedule
- Edge and joint details
- Cleaning compatibility
- Approved physical samples
Translate the guidance into a specification check.
These parameters connect the article to a real product and give procurement, design and engineering teams one reviewable basis.
Compare one controlled basis.
How we apply this decision.
Use the checks on this page when discussing custom video game store fixtures. Send FOCUS the actual merchandise, measured site information and the decisions already made, then ask for a response tied to dimensional inputs, material selections, approval stages and change control rather than a generic fixture proposal.
Review FOCUS capabilities →What still needs project confirmation.
This is published planning guidance, not a tested product specification. Final capacity, materials, electrical configuration, commercial terms and local installation requirements depend on the approved project.
Prepare the required inputs →Avoid these shortcuts.
- Treating a reference image as an approved production specification.
- Comparing suppliers without identical dimensions, quantities and delivery scope.
- Separating material, lighting or hardware decisions from the drawing revision.
- Leaving packing, local installation and site interfaces undefined.
Before the next approval.
- Issue an option schedule with the selected value, decision owner and drawing reference for every departure from the base system.
- Measured floor plan: record the actual project value.
- Service and play space: check it in the operating layout, not only an empty display image.
- Record each open point, owner, due date and required evidence.
Answers to the next practical questions.
01What should I send when asking about custom video game store fixtures?+
Send a measured plan, target quantity, destination, programme and examples of mixed card, collectible and accessory inventory. Add a marked-up floor plan and a representative assortment and identify which decisions around dimensional inputs, material selections, approval stages and change control are already fixed.
02Does an illustration approve the final custom video game store fixtures configuration?+
No. An illustration can communicate the intended arrangement for custom video game store fixtures, but approved drawings, selected components, project-specific checks and the accepted sample establish what may proceed to production.
03Can FOCUS give a fixed custom video game store fixtures price from this guide?+
Not from the guide alone. A comparable quotation needs the agreed configuration, quantity, materials, destination and delivery responsibility. FOCUS confirms commercial terms only after those inputs are defined.
Trace the supporting information.
Nintendo Switch: official technical specifications ↗Hardware specification reference for the named Switch models. Confirm your actual model and accessories rather than applying one envelope to every console.
PlayStation: PS5 ventilation guidance ↗Manufacturer operating guidance for PS5 equipment. Follow the exact device manual; this does not validate a custom kiosk enclosure.
FOCUS project preparation tools ↗Our project input framework; not an independent performance test.
Authorship and sourcing policy ↗How this guide was created, checked and maintained.
Company and fixture reference library ↗Company Process Reference.xlsx · Company Process Reference!A289:A313; Website Copy Reference.xlsx · Customization!A44:A61; Editorial adaptation for this guide.
Content review policyGuidance published 2026-09-09. Editorial check: 2026-09-11. Project engineering approval and physical testing are separate.
Move from research to a project decision.
Keep building the specification.
Card Shop Fixtures
For card shop fixtures, choose the display around what customers need to see and how the item is handed over. Define the usable display area, staff access and replenishment path before selecting the finish. Compare alternatives with the same assortment so capacity and operating differences stay visible. Record one representative merchandise set and rehearse browsing, retrieval, return and restocking on the proposed configuration.
Read next →
Collectible Store Fixtures
For collectible store fixtures, choose the display around what customers need to see and how the item is handed over. Define the usable display area, staff access and replenishment path before selecting the finish. Compare alternatives with the same assortment so capacity and operating differences stay visible. Record one representative merchandise set and rehearse browsing, retrieval, return and restocking on the proposed configuration.
Read next →
Game Store Fixtures
For game store fixtures, choose the display around what customers need to see and how the item is handed over. Define the usable display area, staff access and replenishment path before selecting the finish. Compare alternatives with the same assortment so capacity and operating differences stay visible. Record one representative merchandise set and rehearse browsing, retrieval, return and restocking on the proposed configuration.
Read next →Get a project-specific recommendation.
Send your store plan, product sizes, fixture quantities, destination and opening target. FOCUS will identify the product fit, engineering inputs and quotation basis.
Start Your Display Project